You are here: Home > Restoration > DriEaz > Extractors
Sort By:
Heavy Duty Moisture Probe  (BLD5060) Heavy Duty Moisture Probe (BLD5060)

Extension pin probe for making measurements with the MMS Plus and getting into hard-to-reach areas. with the MMS Plus meters. Features a 3 ft. cord and includes a snap-on cap to protect pins when not in use.

Our Price: $61.00
5" Deep Wall Probes   (BLD5018) 5" Deep Wall Probes (BLD5018)

Use the deep wall 5 in. probes to measure moisture inside drywall, wall cavity insulation, concrete, stucco, plaster, masonry, and other building materials.

Our Price: $69.00
9" Deep Wall Probes   (BLD5020) 9" Deep Wall Probes (BLD5020)

Use these 9 in. probes to measure moisture in drywall, wall cavity insulation, concrete, stucco, plaster, masonry, and other building materials.

Our Price: $74.00
EIFS Probe   (BLD5070) EIFS Probe (BLD5070)

Speciality moisture inspection tool

Pin probe with 4-inch needles designed to provide accurate moisture readings on homes with EIFS (Exterior Insulation Finishing System) cladding.

Our Price: $121.00
2nd Stage Pre-filter (30%)  (DefendAir EX / Hepa 500) (12 pk) 2nd Stage Pre-filter (30%) (DefendAir EX / Hepa 500) (12 pk)

Renew your DefendAir airscrubbers

Regular filter replacement ensures maximum efficiency and helps to prevent cross contamination. Sturdy, high capacity filters effectively captures airborne particles; won't "blow out" under heavy use.

Synthetic fiber filter media rated at 30% efficiency. Captures larger particles to help extend the life of the HEPA filter.

Our Price: $129.00
1st Stage Pre-filter (10%) (DefendAir EX) (12 pk) 1st Stage Pre-filter (10%) (DefendAir EX) (12 pk)

Restore your DefendAir airmover to maximum capacity

High quality filter restores the HEPA 500 airscrubber to full efficiency. Replace regularly to ensure maximum performance.

Our Price: $135.00
Floor Humidity Sleeves (50 pk)    (BLD4750HS-050) Floor Humidity Sleeves (50 pk) (BLD4750HS-050)

Get accurate readings in concrete floors and walls

Protimeter humidity sleeves are designed for use with the Protimeter Hygrostick humidity probe. These depth-selectable sleeves improve and simplify the process of measuring the moisture level of solid walls, floors and other concrete structures.

Our Price: $154.00
Activated Carbon Filter (4 PK) Activated Carbon Filter (4 PK)

Filter upgrade boosts HEPA 500 functionality

HEPA filtration is increasingly seen as the single most important safety device available for creating a safe environment for jobsite workers. Now, with the Activated Carbon Filter, the DefendAir can play an even more important role in keeping an enclosed environment clean and safe – both for workers and for occupants.

Product Features

  • Captures a wide variety of volatile organic compounds (VOCs)
  • Utilizes Extruded Activated Carbon – carbon pellets manufactured to uniform size helps to ensure maximum airflow and maximum contact
  • Works by adsorption, carbon filtration’s natural ability to attract and hold gas and liquid molecules on its surface.
  • One pound of carbon has 534,438 square yards of available surface – equivalent to the area covered by more than 100 football fields.

Our Price: $170.00
Primary Filter (DefendAir EX) Primary Filter (DefendAir EX)

Restore your DefendAir EX to maximum filtering efficiency with this replacement filter.

Our Price: $200.00
DOP Pre-Filter (HEPA 500)   (4 PK) DOP Pre-Filter (HEPA 500) (4 PK)

Gives the DefendAir® HEPA 500 first-pass filtration efficiency

The addition of the DOP filter makes the DefendAir HEPA 500 a high efficiency three-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration. With the standard pre-filter, DOP Stage 2 pre-filter and the HEPA primary filter installed, the HEPA 500 passes laboratory DOP testing conducted per ANSI standards, achieving an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns.

Our Price: $270.00
Hygromaster 2W/Quickstick & Carry Case Hygromaster 2W/Quickstick & Carry Case

HygroMaster 2 Thermo-Hygrometer
Accurate. Fast. Easy to use.

Choose the HygroMaster 2 from Protimeter for its rugged build, color display and extra features. Combining fast action and precision in an easy-to-use unit, the HygroMaster 2 quickly reads temperature and humidity and instantly calculates multiple psychrometric values such as GPP, specific humidity, dew point, WME and more. It even includes a non-contact IR surface temperature probe.

For restoration techs mapping moisture intrusion and monitoring drying progress, the HygroMaster 2 provides fast and accurate readings every time!

Product Features

  • Non-contact infrared surface temperature reading technology

  • Multiple psychrometric calculations, including grains per pound
  • Data logging – up to 6100 results with autologging feature
  • Fast temperature and humidity response
  • Includes the short QuikStick probe, ideal for general measurements.
  • For the high RH environments found in concrete measurements, we recommend the Hygrostick probe, purchased separately.
  • Compatible with Protimeter accessories, including the Plug-In Surface Temperature Probe and the Hammer Probe, purchased separately.
  • Two year limited warranty

Our Price: $576.00
Dri-Eaz Extraction Tool Dri-Eaz Extraction Tool

Easy operation, fast extraction, more profit

The Dri-Eaz Extraction Tool significantly improves initial extraction productivity and increases profitability. A patent-pending glide creates a powerful seal to maximize carpet compression while maintaining high airflow to ensure deep extraction from all carpet types. A convenient vacuum break means no awkward repositioning to maintain extraction, and an ergonomic handle and a lightweight design make the Extraction Tool it comfortable to operate even on the largest projects. Easy to clean and maintain. Pair it up with the HVE 3000 extractor or a Big Gulp 4500 or 3500 truckmount for deeper, faster extraction on every job.

Our Price: $653.00
Hepa Filter - DefendAir Hepa 500   (8 pk) Hepa Filter - DefendAir Hepa 500 (8 pk)

Restore your DefendAir HEPA 500 airmover to maximum capacity

HEPA 500 filters combine filtration ability with filter capacity. To maximize HEPA filter life, be sure to change the prefilters regularly.

Our Price: $1,240.00
Rover HVE Rover HVE

Ride-on High Volume Extractor

One of the biggest challenges for carpet extractors is removing water from the carpet pad. No matter how much suction is applied, water will only come out if the extraction device effectively compress the pad and create an sufficient seal. Some machines accomplish this with heavy weights. These are a hassle to carry onto the job, and clumsy, requiring the operator to repeatedly move and reset the machine. The weight of the rider on the Rover helps to compress the pad, while the Rover’s special polymer glide creates the seal needed to extract as much water as possible. These features, combined with great maneuverability, help to reduce operator fatigue, boost production rates, and produce a deeper, more consistent extraction.

Product Features

  • Separate drive wheels allow the Rover HVE to move easily around corners and in tight spots
  • Replaceable polymer glide seals firmly over all carpets to provide deep extraction
  • Joystick is rated for 5 million cycles
  • Collapsible handle for space-saving storage and ease of transport
  • Front loading wheels make the unit easy to transport and store
  • Extraction can be visually monitored through the clear take-up tube

Product Specifications
67 lbs. | 30 kg
Extraction path width
19.75 in. | 50.2 cm
Dimensions (H × W × D)
45.7 × 22 × 27.6 in.
116 × 56 × 70 cm
Dimensions (folded) (H × W × D)
40.5 × 22 × 10.7 in.
103 × 56 × 27 cm
Amp draw
3 amps
2 speed switch
110 W/115V
One 0.148 HP motor on each wheel
Cord length
45 ft. | 13.7 m
Replaceable polymer
Rotomolded polyethylene
Stainless steel
Motor control
Joystick, rated for 5 million cycles
ETL tested to UL & CSA standards.

Our Price: $3,755.00