Precision-machined 1 in. replacement pins. Original equipment replacements for all pin-equipped Protimeter meters.
Replacement pins for the Hammer Probe (2.5 in.) Ten-pack of replacement insulated needles for Hammer Probe. Overall length 2˝ in. (65 mm).
For fast, reliable measurements The Quikstick is designed for use in newer MMS Plus (F337) meters. The Quikstick is now included with all MMS Plus meters and Restoration Kits (F355).
The Perforation Roller increases the rate of evaporation when speed-drying water damaged walls or floors. The roller is designed to perforate painted surfaces, floor finishes, and other water vapor barriers, to allow the evaporation of moisture that has been trapped inside. The Perforation Roller speeds the rate of evaporation in floors and walls and the long handle makes it easy to use!
Hard Case - Restoration Kit Secure and protect your meters and probes Hard plastic case organizes and protects your sensitive moisture detection tools. Snap-lock fittings secure the contents during transporation and storage. Sturdy foam inserts can be cut to size to hold instruments in place.Product FeaturesMolded ASB case with protective foam insertsPositive-locking tabs keep contents safe during transportDrilled enclosure tab allows case to be secured with padlock (not included)
Slick system for storage and transport This new bracket system creates a clean, safe, custom look in your van or truck. The brackets are black powder-coated metal and will hold any of the new line of Dri-Eaz Saharas. Tip: Create a racking system in your storage area on a wall that holds three or more Sahara Pro X3s.rPack of 105 × 8.25 × 1.5 in15 oz each
Dry carpets and hard surfaces fast! Dry floors fast with the highly portable Dri-Pod! A specially designed outlet grill directs warm, dry air from above and directs it in a powerful 360° pattern across the floor. Dry carpet, tile, vinyl or hardwood floors faster than ever. At only 10.6 lbs and 15 inches across, the Dri-Pod is perfect for small spaces like closets and stairway landings, too.
Tackle three areas at once Expand the versatility of your Sahara airmover! Use with the TurboVent InterAir Drying System (purchased separately) to tackle difficult-to-dry areas such as inside cabinets or under stairs. Gives you the flexibility to direct air into three different locations from one airmover.
InterAir Drying System™ Dry walls with the power of a Sahara HD or previous Sahara Pro-HP TurboDryer®. Attach the TurboVent 48 directly to the snout to deliver a 48-inch wide column of air. Ideal for drying wet wall and ceiling cavities.
Powerful airmover delivers restoration-grade air movement in a highly portable package High performance air movement in a small package? They said it couldn’t be done! But the new Velo delivers just that, and more: high velocity air movement, low amp draw and amazing portability. Dri-Eaz combined these features with easy cleaning, versatile application and legendary U.S.-made quality to make one of the most effective Dri-Eaz airmovers has ever built.
Protect, store and transport with ease Features twenty-five feet of 12-inch semi-rigid ducting that compresses to fit inside a protective case. Connect one or more sections to the Vortex Axial airmover for fast, efficient ventilation wherever you need it. The vinyl case is fitted with a reinforced nylon handle.
The Dri-Eaz WetChec (F213) is a light duty moistuer sensor that gives an audible signal when moisture levels exceed 17%. You can have it personalized with your business information and hand it out to referral sources.
Give a WetChec to adjusters and customers to help them understand what's wet and what's dry. Personalize it with your business information and hand it out to referral sources - it's much more memorable than a business card.The Dri-Eaz WetChec is a handy instrument that allows for quick moisture checking. An audible signal is emitted when moisture levels exceeds 17%.
The Wetchec is made to detect moisture in almost any material including, carpet, underlay, drywall, wood, plaster and upholstery. Inexpensive tool for contractors to help customer monitor their drying projects. Ideal for anyone who needs to monitor abnormal moisture.
The ultimate restoration airmover The Sahara Pro X3 delivers powerful 2700 CFM airflow exactly where you need it -- at floor level, up walls, or up stairways. Features three speed settings, low amp draw, built-in breaker-protected outlets and a rugged rotomolded housing.
Extend the reach of your Sahara airmover Ventilate or dry confined spaces like closets, crawlspaces or attics with the TurboDuct. Attach to the snout of the Sahara HD or Pro X3 (also works on the Sahara Pro HP model) to extend the reach of your air mover 15 feet! Manufactured in the USA using high quality PVC-coated polyester material and finished with a fabric tape wear strip. The ducting is anti-static, and is resistant to mildew, mold, rot and UV damage.
Six ways to dry Looking for an airmover that offers six different positions to help you tackle the most difficult drying challenges? Looking for the most CFM per circuit of any airmover on the market? Look no further: it’s called the Ace!
High volume, high velocity airflow for fast drying. Aerodynamically designed for the highest velocity airflow at 3100 tested CFM – the Jet's built-in angles maximize the flow of turbulent air along the floor. Its focused vanes let you direct extra velocity exactly where you need it, and the unit's molded design offsets from the wall for optimizing the fastest wall and floor drying. Along with powerful airflow and minimal amp draw, the Jet is significantly quieter thanks to the unit's double-walled construction. Quick stackability make moving and storage Jets easy and convenient.
More power for fast drying and specialty applications Get the CFM and static pressure you need to dry quickly and to power through specialty drying challenges. This durable and reliable performer works especially well in applications that require stronger static pressure – such as drying in walls, under cabinets and in crawlspaces.
InterAir Drying System™ Attach the TurboVent InterAir Drying System to any Dri-Eaz Sahara TurboDryer and force air into difficult-to-dry cavities like cabinet bases, wall interiors, and even ceiling voids. For optimum results, use the Sahara HD (or the previous model Sahara Pro-HP) TurboDryer.
Ingenious design holds carpet to Sahara airmoverNeed to float that carpet but can't hold it to the airmover? The MAXGrip Carpet Clamp provides an innovative and easy to use design to hold carpets firmly to the Sahara Pro X3 or Sahara HD airmovers while drying. The MAXGrip will not damage carpets and is easy to remove from the airmover when not in use.
Dry floors in minutes The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. The AirPath attack works by pulling warm, dry air from above and directing it across the entire surface of the floor – up to 12 feet in all directions. Simply place the AirPath in the center of a room and lock it in to place. Carpets, tile, vinyl hardwood floors will dry faster than ever.
The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. The AirPath attack works by pulling warm, dry air from above and directing it across the entire surface of the floor – up to 12 feet in all directions. Simply place the AirPath in the center of a room and lock it in to place. Carpets, tile, vinyl hardwood floors will dry faster than ever.
Powerful, efficient ventilation This Dri-Eaz airmover will ventilate confined spaces through up to 125 feet of Sto&Go ducting – or propel dry air across large open areas to aid in drying. Improve indoor air quality; remove unwanted odors.
Unrivalled air delivery The AirWolf provides an unbeatable combination of powerful CFM and strong static pressure. Optimized for use with the WolfPack hardwood floor drying system, the AirWolf/WolfPack combination dries wood floors from the bottom out and can help avoid costly repair bills.
DriForce Accessory Kit Dry inside walls without damage When used with the DriForce Airmover base unit(purchased separately), the Accessory Kit allows you to direct high-pressure air into wet wall cavities and other areas for fast, effective drying. You only need to make quarter-inch holes – this can usually be done behind the baseboards – to introduce warm, dry air into wall cavities, behind cabinets, tubs, under stairwells, and more. Are you new to the DriForce System? We recommend the complete DriForce Interair Drying System, which includes the airmover base unit and all the components of the Accessory Kit described here.The Accessory Kit includes:
Rugged, durable, and highly portable, the Dri-Eaz LGR 2800i Dehumidifier is a workhorse of a machine, built for high-performance dehumidification in industrial environments. This unit is ideally suited for water damage restoration, structural drying, construction, and other applications that require temporary industrial-strength dehumidification. It reduces humidity by removing excess water vapor from the air. With proper usage, the LGR 2800i can help dry carpeting, carpet pads, floors, walls, building contents, and much more. It can also help prevent secondary damage caused by seasonally high humidity.
The LGR 2800i Industrial Dehumidifier lowers humidity by pulling moist air in and moving it across a cold evaporator coil. Moisture condenses into water on this coil. The water is pumped out of the unit through the supplied drain hose using an internal condensate pump system. The water can be pumped to a nearby drain, sink, bucket, or to the outdoors with approximately 20 feet of vertical lift if necessary.
For the most effective drying results in your application, consider using the LGR 2800i with air movers, such as Dri-Eaz Ace TurboDryer Air Movers. When air movers are placed around the perimeter of a space to be dried, these appliances help to better distribute heat energy and release moisture from wet surfaces into the air.
In the LGR 2800i industrial dehumidifier, Dri-Eaz has created the first "intelligent" LGR unit – adding even more punch to an already feature-rich dehumidification appliance. The 2800i uses wireless sensor technology to automatically monitor and display its inlet and outlet conditions on the control panel. This gives you instant access to consistent and accurate readings so that you can better manage unit operation and jobsite progress.
The built-in wireless sensors are compatible with the Dri-Eaz HygroTrac Remote Monitoring System, which allows you to track dehumidifier performance and drying progress automatically through the HygroTrac website.
Manufactured in the United States, the Dri-Eaz LGR 2800i Portable Dehumidifier (Dri-Eaz Item # F410) includes an array of easy-to-use functions to give you greater control over operation. Many of these features can also give you additional insight into your jobsite efficiency.