(Your shopping cart is empty)
You are here: Home > Truckmount Parts and Accessories

Please Bookmark and Share. It's easy!

| More
Sort By:
Page of 1
Hard to find fittings!
Our Price: $0.60

1) Close Nipple 1/4” both ends male.
2) Long Nipple 1/4” same as above, but longer (11/2”)unthreaded mid-section.
3) Long Nipple 1/4” same as above, but longer (2”) unthreaded mid-section.
4) Close nipple 3/8” both ends male.
5) Long nipple 3/8” same as above, but longer (11/2”) unthreaded mid-section.
6) Close nipple 1/2” both ends male.
7) Long nipple 1/2” same as above, but longer (11/2”) unthreaded mid-section.
8) Bushing 1/4” male x 1/8” female.
9) Bushing 3/8” male x 1/4” female.
10) Bushing 1/2” male x 3/8” female.
11) Adapter 1/4” male x 1/4” female.
12) Adapter 3/8” female x 1/4” male.
13) Adapter 3/8” male x 3/8” female.
14) Adapter 1/2” female x 1/4” male.
15) Adapter 1/2” female x 3/8” male.
16) Reducer coupling 1/4” female x 1/8” female.
17) Reducer coupling 3/8” female x 1/4” female.
18) Coupling 1/8” female x 1/8” female.
19) Coupling 1/4” female x 1/4” female.
20) Coupling 3/8” female x 3/8” female.
21) Flare connector 3/8” flare male x 1/4” pipe thread male.
22) Flare connector 3/8” flare male x 3/8” pipe thread male.
23) Female 90 degree elbow 1/8” female x 1/8” female.
24) Female 90 degree elbow 1/4” female x 1/4” female.
25) Female 90 degree elbow 3/8” female x 3/8” female.
26) Street elbow 90 degree 1/4” male x 1/4” female.
27) Street elbow 90 degree 1/2” male x 1/2” female.
28) Street elbow 45 degree 1/4” male x 1/4” female.
29) Street elbow 45 degree 3/8” male x 3/8” female.
30) Female Tee 3/8” female x 3/8” female x 3/8” female.
31) Street Tee 3/8” female x 3/8” female x 3/8” male.
32) 90 degree elbow barb 3/8” male thread x 1/2” (to hose) barb.
33) Hose mender 1/4” barb to 1/4” barb.
34) Hose barb 1/4” barb (hose to pipe) x 1/4” male thread.
35) Hose barb 1/2” barb (hose to pipe) x 1/2” male.
36) Hose barb 5/8” barb (hose to pipe) x 1/2” male.
37) Hose barb 3/4” barb (hose to pipe) x 1/2” male.
38) Hose barb 3/4” barb (hose to pipe) x 3/4” male.
39) Hex nipple reducer 3/8” male x 1/4” male.
40) Hex nipple reducer 1/4” male x 1/8” male.
41) Hex nipple 1/4” male x 1/4” male.
42) Hex nipple 3/8” male x 3/8” male.
43) Female swivel connector 3/4” female x 3/4” barb.
44) Male connector 3/4” male x 3/4” barb.
45) Reducer 3/4” male x 3/8” female.
46) Quick connect 1/8” open female.
47) Quick connect 1/8” open male.
48) Quick connect 1/4” female with open male end.
49) Quick connect 1/4” female with open female end.
50) Quick connect 3/8” female with open male end.
51) Quick connect 3/8” female with open female end.
52) High pressure valve 1/4” female 1/4” female. 3000 psi.
53) Brass valve 1/2” female x 1/2” female.
54) Quick connect 1/2” female x 1/2” male open end.
55) Quick connect 1/2” female x 1/2” female open end.
56) Quick connect 1/8” female x 1/8” open male end.
57) Quick connect 1/8” female x 1/8” open female end.
58) Quick connect 3/8” closed female.
59) Quick connect 1/4” closed female.
60) Quick connect 3/8” closed male.
61) Quick connect 1/4” closed male.
62) Quick connect 1/4” closed female. Stainless Steel.
63) Quick connect 1/8” closed female.
64) Quick connect 1/4” closed male. Stainless Steel.
65) Quick connect 1/8” closed male.
66) Bushing 3/8" male x garden hose male.
67) Bushing 3/8” male x garden hose female swivel. Instantly converts a garden hose to take a 3/8” thread so you can connect a 3/8” QD and plug it in directly to your truck-mount.
68) Male SAE 45 degrees Ridged 1/4" Male x 1/2" Barb.
69) NPTF/ NPTF 1/8" Male x 1/8" Male.
70) 2FTX 1/8" 37degree Flare/NPTF 1/8" x 1/8" Flare 37 degree.
71) Wand filter 1/4”. Goes between the wand valve and QD.
72) T-jet filter 1/4”. This holds a T-jet and has a filter.
73) 1/4” on one side, the other side has a ferrule that makes it attachable to an 1/8” tube (usually found on a wand after the valve) with a nut.
74) Adapter 3/8” male x 3/4” female.(usually used to reduce 3/4” male on the water softener to 3/8” male, so you can attach a 3/8” QD - #58 or #60 in the picture on left)

All fittings are brass & pipe thread unless indicated otherwise.
Kohler Spark Plugs
Our Price: $3.48

Universal Fuel Filter
Our Price: $6.99

Fits all. Clear view so you can monitor the filtering.
Kohler Command Motor Oil
Our Price: $7.49

Kohler Command Motor Oil OEM SAE 10W-30
Kohler Command Pre Cleaner
Our Price: $9.21

Kohler Command Pre Cleaners for all CH models.
90 Degree 2" Hose Barb x 2" Pipe Thread
Our Price: $9.95

90 Degree 2" Hose Barb x 2" Pipe Thread
Lubricants
Our Price: $9.99

Lubricants from left to right: Aeon PD synthetic lubricant for blowers.
For Gardner Denver Sutorbilt, CycloBlower and DuroFlow, as well as other positive displacement blowers.
1 quart $21.88. #AeonBO

Hypro Water Pump Oil.
SAE30 Weight, high-grade, non-detergent pump oil.
1 quart $12.99. #HyproWPO

Cat Water Pump Oil.
Crankcase Oil. ISO 68 Special Formula. Multi-viscosity premium grade. $9.99
21oz . #CatWPO

Amsoil Metal Protector.
Blower lubricant that you spray at end of day to displace moisture. Works better than other lubricants. Especially made for harder working blowers.
8 3/4 oz $9.99
Chemical Pump (last step injection) Diaphram
Our Price: $10.99

Fits Prochems, Blueline, Chemspec, and others

Click here for a schematic (diagram) of the chemical pump

Chemical Pump Disk
Our Price: $11.99

Disk for chemical pump. When the disk gets dirt and stops moving freely so will your chemical pump
Replacement Filter Sock for Outside Filter
Our Price: $14.78

Additional cloth screen for outside filter.

This is for the Outside filter
Kohler Oil Filter
Our Price: $14.98

Kohler Oil Filter for all Kohler motors.
Kubota Oil Filter
Our Price: $17.98

Kubota Oil Filter for Blue Line, Prochem, Kubota, and other 31 HP Kubotas.
Blue Line Belts
Our Price: $19.92

Truck-mount Descaler
Our Price: $21.69

Truck-mount descaler.
Passes all DOT Hazardous regulations!
Safer alternative to all others available.
Made with acid salts that have a pH of less than 1.
Contains inhibitors that protect against metal corrosion.
1 quart treats an average truck-mount!
Kohler Command Air Filter
Our Price: $22.99

Kohler Command Air Filter for all CH models.
Nissan Oil Filter
Our Price: $23.99

Nissan Oil Filter for Powerclean, Blue Line, and Prochem, Fox, Chemspec and other truck mounts (A12 & A15 blocks).
Stainless steel plastic tab holders
Our Price: $33.51

Attaches easily to be used with the hydro-force. This one is the most heavy-duty one we found.
Secondary Air Filter
Our Price: $34.99

Secondary Air Filter for Brigsstraton, Kohler, and Kubota.
Pressure RegulatorJE Adams 3/8" 3 openings (one is bypass)
Our Price: $39.00

3 openings (one is bypass) Also available: Repair kit
Stainless Steel Filter for Outside Filter
Our Price: $39.78

This insert will not rust, has a large surface area for waste collection & free airflow, is durable and long lasting.

This is for the Outside filter
Air Filter
Our Price: $39.99

Air filter for Brigsstraton, Kohler, and Kubota.
Pressure gauge
Our Price: $44.99

3000 psi.
Pressure gauge like Ashcroft.
Fits Prochems, BlueLine, Chemspec and many others.
Why pay $60.00 elsewhere?

Picture is not actual gauge.
Styrofoam Holder, stainless steel
Our Price: $44.99

Foam block/ styrofoam holder.
Organize your van with stainless steel foam block holder.
Will not rust like steel or corrode like aluminum.
Pressure Regulator AP 3/8"
Our Price: $49.00

3/8" FPT inlet, outlet and bypass
7 GPM, pressure adjusts 200 to 2000 psi.
200 degree F,
Stainless steel plunger and seals.

Get a hexheadplug to cover up 1 hole and make this a 2 hole regulator.
Tune Up Kit for Kohler CH models
CH Model Tune Up Kit
Our Price: $49.99

Complete Tune Up Kit for Kohler CH models. Kit Includes: 2 Spark Plugs 2 Quarts of Oil Air Filter Precleaner Fuel Filter
Tune Up Kit for Kohler CH Pro Models
CH Pro Model Tune Up Kit
Our Price: $49.99

Complete Tune Up Kit for Kohler CH Pro Models. Kit Includes: 2 Spark Plugs 2 Quarts of Oil Air Filter Precleaner Fuel Filter
Briggs & Stratton Vanguard Engine Tune Up Kit
Our Price: $49.99

Briggs & Stratton Vanguard 18 thru 20 HP complete engine tune up kit. Kit Includes: 1 Air Filter 1 Pre-Filter 1 Oil Filter 1 Fuel Filter 2 Spark Plugs
Universal Ignition Key
Our Price: $57.56

Fits most all truck-mounts.
3/4" neck.
In some cases you may have to drill the hole for the old key it fit this on your panel. 3 way.
Water Temp Gauge
Our Price: $59.99

Water Temp. gauge 320 degrees (Prochem part #18-808530, BlueLine part #26-007)
Pressure Gauge. Ashcroft, 1500psi
Our Price: $59.99

Pressure Gauge. Ashcroft
1500 psi

1500psi Prochem part #18-808526, BlueLine part #26-005), g3
Pressure Gauge. Ashcroft, 3000 psi
Our Price: $59.99

Pressure Gauge. Ashcroft
3000 psi


3000psi (Prochem part #18-808529, BlueLine part #26-006), g4
Chemical Flow Meters by "Dwyer" (with or without knob)
Our Price: $59.99

Vac Gauge. 30" Lift
Our Price: $59.99

Vac Gauge.  30” Lift.
Hour Meter, Hobbs
Our Price: $66.60

Chemical Metering Valve
Our Price: $69.99

Fits most Truck-mounts
3 Way Valve
Our Price: $74.99

3 Way Valve. 1/8”
Sponge Rubber Striping
Our Price: $79.00

Truck-mount waste tank heavy duty sponge rubber striping. 7/16" x 1" x 25ft, self-adhesive. To apply, remove residue of pre-existing striping (use Citra-Pure to remove any residue). Measure to size and install.
Reel Floor Mount Bracket
Our Price: $86.00

1) 1 reel floor mount bracket $86. #srb1
2) 2 reel floor mount bracket $88. #srb2
3) Stack bracket $98.#srb3
Heavy Duty Pressure Regulator with bypass
Our Price: $89.99

Outside Filter
Our Price: $94.99

Keeps your waste tank clean. Includes one inside cloth screen.

Also Available: Replacement Filter Sock for Outside Filter

Stainless Steel Filter for Outside Filter
Waterlift Gauge
Our Price: $95.00


Tells you the waterlift and mercury lift at the wand. Attach to your vac hose for quick reading.
Works on 1 1/2” hose and 2” hose.
Inline Temperature Gauge
Our Price: $95.00

Now you can read the temperature at the wand!
Helps you figure out how to preserve heat.
Comes with 1/4” male & female couplers that hook up to your tool or solution lines.
Magic Mixer, Manuel
Our Price: $109.00

Save time and money! Mixing is now a breeze. If you currently use liquid you will save as much as 50% by switching to powder. Lifetime warranty on stainless steel construction. Includes pail.
This is what Dr. Aziz, our Ph.D Chemist, says about it: "Mixing is fundamental in obtaining a uniform homogenous product. A number of professional cleaners opt for the liquid type product and pay for the convenience. With the Magic Mixer you can have the convenience of a liquid but the performance of the powders. The blade generates incredible turbulence so when the detergent hits the blade it quickly looses it’s layers diffusing itself with the water. This intense turbulence at the blade and extending out 1 to 2 inches is known as the zone of attrition. Beyond this zone, the material is thoroughly mixed and particles are dissolved by the laminar flow set up by the blade. You can have the liquid concentrate, which is very uniform in no time."
Also available a Holder for the mixer. Patents pending
Metal Strapping System
Our Price: $139.00
Sale Price: $119.00
You save $20.00!

Metal Strapping System.
Turn any 55 gal drum into a fresh water tank.
All Stainless Steel.
Adjustable and extremely easy to install.

Not included in free shipping offer.
Magic Mixer, Electric
Our Price: $219.00
Sale Price: $139.00
You save $80.00!

Save time and money! Mixing is now a breeze. If you currently use liquid you will save as much as 50% by switching to powder. Lifetime warranty on stainless steel construction. Includes pail.
This is the Electric version.  Electric can be hooked up to either the truck-mount 12 volt battery or to the van/truck/car battery.  Can also run on 24 volt current which doubles the mixing speed.
 
This is what Dr. Aziz, our Ph.D Chemist, says about it: "Mixing is fundamental in obtaining a uniform homogenous product. A number of professional cleaners opt for the liquid type product and pay for the convenience. With the Magic Mixer you can have the convenience of a liquid but the performance of the powders. The blade generates incredible turbulence so when the detergent hits the blade it quickly looses it’s layers diffusing itself with the water. This intense turbulence at the blade and extending out 1 to 2 inches is known as the zone of attrition. Beyond this zone, the material is thoroughly mixed and particles are dissolved by the laminar flow set up by the blade. You can have the liquid concentrate, which is very uniform in no time."
Also available a Holder for the mixer. Patents pending
Waste Tank Shut Off Switch
Our Price: $139.60

Waste tank shut off switch for Prochems and Blue Lines.
Bayco Valve
Our Price: $345.00
Sale Price: $299.00
You save $46.00!

Double your vacuum with our new Bayco valve.
A normal vacuum relief valve opens up to let air in as soon as your wand hits the carpet.
This replacement valve opens at 15” of mercury, to give you maximum vacuum.
Ideal for #3 #4 blowers.
Our valve comes complete with instructions and mounting bracket! 2”.

Click here for instructions on how to install the Bayco Valve.

Van Shelf
Our Price: $343.85
Sale Price: $319.00
You save $24.85!

Get your chemicals off the floor.
Made of space age composite (light weight).
This space-saving truck shelf mounts directly over the van wheel well, utilizing seldom-used space.
This three-shelf unit will hold 24 single-gallon containers or any variety of containers or accessories.
Note: Assembly required.
4" lips - bottles won't spill.

Now Ships Free!!
Fresh Water Demand System
Our Price: $347.00

Fresh Water Demand System by Flojet: to transfer water from fresh water tank to machine. Bladder system (includes pump & filter) makes the pump last longer. Installs on wall saving valuable truck space. Replacement pump
for above is available
Fresh Water Transfer pump with sensor technology
Our Price: $399.00
Sale Price: $359.00
You save $40.00!

Sale Price!  Regularly $399.00!
 
Fresh water transfer pump with sensor technology.
The sensor signals the pump to come on and off as needed.
Extends pump life and reduces fire hazards and shorts.
Sensor Light weight mounts anywhere.  
  • 4.5 GPM
  • Solid State Proprietary Micro Controller
  • Automatically adjusts to 12 or 24Vdc Electrical Systems
  • Pressure Regulated Variable Speed Drive
  • Hall Effect Pressure Sensor
  • No Switch, No Points, No Contacts
  • Reduced Current, Extended Life
  • Saves Energy at all Flow Rates
  • CSA Listed for US and Canadian Sales
  • Space Saving Eliminates Accumulator Tank
  • EN ISO 8846 Marine (Ignition Protected)
 
 
Vacuum reels
Our Price: $427.00

Vac Reels. 1. High profile saves space & still holds 200ft. Height 49", depth 45", & width 16.5". $427 2. Like above, except it holds 250ft and has a width of 20.5". $439 3. Like above, except it holds 300ft and has a width of 24.5". $495.

Low profile (38") & live reels also available.

Excluded from free shipping offer
Electric Vacuum Hose Reel
Our Price: $1,299.00

250 foot capacity.
12 volt electric hooks up to truck-mount or van battery.
Easy to wire.

Excluded from free shipping offer
Electric Hose Reel Set, 300' Vac and Dual 300' Solution (Cleanco)
Our Price: $1,610.15

Electric Hose Reel Set, 300' Vac and Dual 300' Solution
100 Gallon aluminum Horizontal Fresh Water Tank (Cleanco)
Our Price: $1,773.25

100 Gallon aluminum Horizontal Fresh Water Tank
   
 
www.magicwandcompany.com

 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © www.magicwandcompany.com. All Rights Reserved.
Shopping Cart Software by Volusion