You are here: Home > Fittings Stainless Steel/Brass
Sort By:
1
T-Jet Filter T-Jet Filter

T-jet fits in this and the filter picks up debris that would regularly clog the jet.

Our Price: $8.61
1/4" Ball Shutoff Valve 1/4" Ball Shutoff Valve

Heavy Duty. New design eliminates the need for an additional adapter nipple.

Our Price: $15.99
Solution Reel high pressure reel swivel assembly

Swivel piece makes your solution line live. No more twisting manually, or need to disconnect.

Our Price: $124.00
Sale Price: $115.00
You save $9.00!
Jets

Jets.
Basically there are 2 types of jets, T-jets & V-jets,
T-jets (on left in picture) have no thread. They are encased in a holder that is removable, which has threads.
V-jets (on right in picture) have threads on them.

What do the #s on the jets mean?
If it says “1/4” on top, it means it is 1/4” thread.
If it says “VV” on top it is a V jet.
If it says “11002” below, that means the spraying angle is 110 degrees, and the opening of the hole is 02.
The bigger the last #(02 in this case), the bigger the opening.
.02 in the 11102 means 2 gallons per minute water flow at 40 psi.
But at 500 psi 11002 will put out .71 gallons per minute.
Numbers on the jets are always derived using 40 psi pressure.
Typically for carpet cleaning wands, manufactures put in jets that when the last 2 #s(02 in this case) are added together, they equal 06. This usually gives the right amount of heat and flushing ability.
You can decrease heat and increase flushing by getting jets which will add up to larger openings.
To increase heat and reduce flushing, you would do the opposite.
SS below means stainless steel. If it doesn’t say anything, then it is brass. The jets listed here are the most common jets used on wands, and tools like sprayers and hydroforces.
Different jet sizes are also available - call us Toll Free at (877)926-3748 for those.

All brass jets listed above are $6.28 each.
All SS(stainless steel) jets listed above are $12.91 each.

1/4" female quick connector, Brass, mate to 1/4"QDmale 1/4" female quick connector, Brass, mate to 1/4"QDmale

1/4" most commonly used connectors for truckmounts, brass
See the 1/4" Male that goes with this.

Our Price: $9.99
Sale Price: $7.95
You save $2.04!
1/4" qd brass 1/4" male quick connector, mate to 1/4"QDFemale

1/4" most commonly used connectors for truck-mounts.

These QDs have stainless steel tips that withstand hotter water! See the 1/4" Female that goes with this.

Our Price: $7.99
Sale Price: $3.95
You save $4.04!
3 Way Chemical Valve 3 Way Chemical Valve

3 Way Valve. 1/8”

Our Price: $74.99
Solution line splitter

Splits your 1/4" solution line into two.
All stainless steel construction and handles pressure up to 3000psi.
Ideal for dual wand or hydroforce use while cleaning.
Includes 1/4" nipples and 1 male and 2 female quick connects.

Our Price: $48.99
Sale Price: $39.99
You save $9.00!
Universal Faucet Adapter Kit

Faucet attachment for almost every faucet.
Includes quick connect for garden hose.
An absolute must for truckmount owners!

Our Price: $54.99
Locking Female Quick Disconnects Locking Female Quick Disconnects

Locking Female Quick Disconnects.
Locks the male and female securely.
Works with any 1/4" male QD
Brass

Our Price: $26.99
Solution Line Repair Kit

For 1/4" Goodyear hose.
Don't be caught without these handy repair kits. Repair your own solution line using the following steps:

   * Cut the solution line where you want to make a new connection.
   * Screw (counter-clockwise) the larger part of the field repair kit on the solution line about 3/8" down on the hose.
   * Screw (clockwise) the part with the long stem inside the other end of the larger part that you screwed in the hose.

Silver plated steel. Also available in stainless steel. 3/8" repair kit also available.

Not recommended on lines that are too old and for extremely high pressure operations.

Our Price: $14.99
Dri Master Bar Jet Dri Master Bar Jet

Now All Stainless Steel!
#076-070

Our Price: $112.69
Dri Master shut off Valve Dri Master shut off Valve

Dri Master shut off Valve

Our Price: $97.18
Repair kit for Dri Master shut off Valve Repair kit for Dri Master shut off Valve

Repair kit for Dri Master shut off Valve

Our Price: $42.09
Rx-20 Cone Jet Rx-20 Cone Jet

Jet in the new Rx-20 3 jet head assembly

Our Price: $79.99
Popular Valves and Repair Kits Popular Valves and Repair Kits

Popular Valves and Repair Kits


1) High pressure valve rated up to 5000 psi, but commonly referred to as 3000 psi. Says on handle: “Linear Made in Italy” Fits some high-pressure wands.

Valves-1 $59.49


2) Gekko high pressure valve says “MV960 Made in Italy” on it. No repair kit

Valves-2 $51.75.


3) 500 psi valve says “P ” on it. Brass, high temp, stainless stem, teflon seat. Valves-3 $33.69

Also available in 200 psi with brass stem. Valves-3 Brass Stem $29.99.

Repair kit for 500 psi complete stem and spring. Valves-3RK is $10.35

Repair kit for 200 psi complete stem assembly & spring. Valves-3RK $10.35


4) Prochem valve.

Valves-4 $109.99

Repair kit. Valves-4RK is $39.99

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75.)


5) 500 psi high temp. with stainless steel stem and handle. Valve says “PMF” on one side & “USA” on other side. Comes with cast aluminum hanger & handle as pictured (to hook up to wand) in either 1 1/2” or 1 1/4 inch. Please specify.

Valves-5P $19.24 (Plastic)

Valves-5A $21.90 (Aluminum)

Valves-5B $29.99 (Brass)

Valves-5S $37.86 (Stainless Steel)

Repair kit: Valves-5RK $10.35


6) Kingston Valve. High pressure valve. (We recommend the Universal Valve #14 that is all stainless steel.)

Valves-6 $36.12

Repair kit: Valves-6RK $23.09


7) 800 psi high temp. with aluminum handle & brass stem, says “PMF” V800”.

Valves-7 $67.85

Repair kit 1 comes with O-rings, seat repair kit & spring R800 $12.65

Repair kit 2 has all of kit 1 & the stem with all parts on it assembled for you R800S $33.85

Repair kit 3 has all the same as kit 2 as well as the bottom nut. R800SN $37.95

Repair kit for newer 800 valves. R800EZ $12.65


8) 800 psi Buttercup valve, manufactured by Para Plate. High temp, stainless stem fits in a hanger. (AC42 bolt on hanger for 1 1/2” tube available). Fits our “Buttercup” wands and others. Softest feel valve

Valves-8 $89.00

Repair kit: Valves-8RK $33.35

AC42 Bolt On Hanger $21.00


9) Westpak Valve(20-0030) 1200 psi valve for Big Boy wands and others.

Valves-9 $35.99

Repair Kit: Valves-9RK $22.99

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75)


10) Kingston low pressure valve says “K”

Valves-10 $19.99

Repair kit: Valves-10RK $14.99


11) Stainless Steel PMF. Stainless steel 1000 psi valve, interchangeable with #3 & #10.

Valves-11 $51.79

Repair Kit for 500 psi complete stem and spring: Valves-11RK $19.99


12) Brass PMF. Exactly like #7, except it is made out of stainless steel so it handles 1250 psi. Says “V1250 PMF” on it.

Valves-12 $87.99

Repair kit 1 comes with O-rings, seat repair kit & spring R800 $12.65

Repair kit 2 has all of kit 1 & the stem with all parts on it assembled for you R800S $33.35

Repair kit 3 has all the same as kit 2 as well as the bottom nut. R800SN $37.95


13) Upholstery Economy PMF. Acetal plastic, 120psi, up to 140 degrees, stainless stem & stainless handle is included. Says “PMF” on one side.

Valves-13 $19.99 (Acetal Plastic)

Valves-13A $22.99 (Aluminum)

Valves-13B $22.99 (Brass)

Repair kit: Valves-13RK $8.05


14) New Universal Valve. All Stainless Steel. 1200 psi. Fits on: Prochem #4, Kingston High Pressure #6,CMP #9 and Kingston Angle #15.

Valves-14 $51.75

Repair kit: Valves-14RK $22.99 (repair kit contains all internal parts, stem, O-rings, spring, ball, teflon seat, and ss washer.)


15) Kingston Angle Valve. Says “K” on it.

Valves-15 $24.39

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75)

16) RX-20 Valve Hydramaster, Stainless Steel. RX20 Rotary Drimaster Hydra Hoe & Upholstery tools

Valves-16 $123
Repair Kit: Stem only - $31.00

17) 3200 psi. Says “RL 20”. Fits Spraymaster and Hydroforces.

Valves-17 $39.99


18) Westpak (20-0001) valve, found on some upholstery & detailer tools.

Valves-18 $19.99

Repair kit: Valves-18RK $13.80


19) Westpak (20-0022) valve, 1200 psi.

Valves-19 $13.99

Repair kit: Valves-19RK $13.80


20) Precision Fluid Controls (4015), Replaces Para Plate (Buttercup). More heavy duty.

Valves-20 $99.99.

Repair kit: is Valves-20RK $33

Hard to find fittings! Hard to find fittings!

1) Close Nipple 1/4” both ends male.
2) Long Nipple 1/4” same as above, but longer (11/2”)unthreaded mid-section.
3) Long Nipple 1/4” same as above, but longer (2”) unthreaded mid-section.
4) Close nipple 3/8” both ends male.
5) Long nipple 3/8” same as above, but longer (11/2”) unthreaded mid-section.
6) Close nipple 1/2” both ends male.
7) Long nipple 1/2” same as above, but longer (11/2”) unthreaded mid-section.
8) Bushing 1/4” male x 1/8” female.
9) Bushing 3/8” male x 1/4” female.
10) Bushing 1/2” male x 3/8” female.
11) Adapter 1/4” male x 1/4” female.
12) Adapter 3/8” female x 1/4” male.
13) Adapter 3/8” male x 3/8” female.
14) Adapter 1/2” female x 1/4” male.
15) Adapter 1/2” female x 3/8” male.
16) Reducer coupling 1/4” female x 1/8” female.
17) Reducer coupling 3/8” female x 1/4” female.
18) Coupling 1/8” female x 1/8” female.
19) Coupling 1/4” female x 1/4” female.
20) Coupling 3/8” female x 3/8” female.
21) Flare connector 3/8” flare male x 1/4” pipe thread male.
22) Flare connector 3/8” flare male x 3/8” pipe thread male.
23) Female 90 degree elbow 1/8” female x 1/8” female.
24) Female 90 degree elbow 1/4” female x 1/4” female.
25) Female 90 degree elbow 3/8” female x 3/8” female.
26) Street elbow 90 degree 1/4” male x 1/4” female.
27) Street elbow 90 degree 1/2” male x 1/2” female.
28) Street elbow 45 degree 1/4” male x 1/4” female.
29) Street elbow 45 degree 3/8” male x 3/8” female.
30) Female Tee 3/8” female x 3/8” female x 3/8” female.
31) Street Tee 3/8” female x 3/8” female x 3/8” male.
32) 90 degree elbow barb 3/8” male thread x 1/2” (to hose) barb.
33) Hose mender 1/4” barb to 1/4” barb.
34) Hose barb 1/4” barb (hose to pipe) x 1/4” male thread.
35) Hose barb 1/2” barb (hose to pipe) x 1/2” male.
36) Hose barb 5/8” barb (hose to pipe) x 1/2” male.
37) Hose barb 3/4” barb (hose to pipe) x 1/2” male.
38) Hose barb 3/4” barb (hose to pipe) x 3/4” male.
39) Hex nipple reducer 3/8” male x 1/4” male.
40) Hex nipple reducer 1/4” male x 1/8” male.
41) Hex nipple 1/4” male x 1/4” male.
42) Hex nipple 3/8” male x 3/8” male.
43) Female swivel connector 3/4” female x 3/4” barb.
44) Male connector 3/4” male x 3/4” barb.
45) Reducer 3/4” male x 3/8” female.
46) Quick connect 1/8” open female.
47) Quick connect 1/8” open male.
48) Quick connect 1/4” female with open male end.
49) Quick connect 1/4” female with open female end.
50) Quick connect 3/8” female with open male end.
51) Quick connect 3/8” female with open female end.
52) High pressure valve 1/4” female 1/4” female. 3000 psi.
53) Brass valve 1/2” female x 1/2” female.
54) Quick connect 1/2” female x 1/2” male open end.
55) Quick connect 1/2” female x 1/2” female open end.
56) Quick connect 1/8” female x 1/8” open male end.
57) Quick connect 1/8” female x 1/8” open female end.
58) Quick connect 3/8” closed female.
59) Quick connect 1/4” closed female.
60) Quick connect 3/8” closed male.
61) Quick connect 1/4” closed male.
62) Quick connect 1/4” closed female. Stainless Steel.
63) Quick connect 1/8” closed female.
64) Quick connect 1/4” closed male. Stainless Steel.
65) Quick connect 1/8” closed male.
66) Bushing 3/8" male x garden hose male.
67) Bushing 3/8” male x garden hose female swivel. Instantly converts a garden hose to take a 3/8” thread so you can connect a 3/8” QD and plug it in directly to your truck-mount.
68) Male SAE 45 degrees Ridged 1/4" Male x 1/2" Barb.
69) NPTF/ NPTF 1/8" Male x 1/8" Male.
70) 2FTX 1/8" 37degree Flare/NPTF 1/8" x 1/8" Flare 37 degree.
71) Wand filter 1/4”. Goes between the wand valve and QD.
72) T-jet filter 1/4”. This holds a T-jet and has a filter.
73) 1/4” on one side, the other side has a ferrule that makes it attachable to an 1/8” tube (usually found on a wand after the valve) with a nut.
74) Adapter 3/8” male x 3/4” female.(usually used to reduce 3/4” male on the water softener to 3/8” male, so you can attach a 3/8” QD - #58 or #60 in the picture on left)
All fittings are brass & pipe thread unless indicated otherwise.

Our Price: $0.60
Inline filter, 1/4" Inline filter, 1/4"

Wand Filter
Keeps debris from getting caught in the jets.
Easy do-it-yourself installation.
Save headaches from on the job clogged jets.

Our Price: $8.61
2 Spacers: 20-0059 on page 28.

Valve mount adaptor (spacers) for #14 valve and #9 Valve.  
Allows these valves to fit Prochem and PMF Valve

Our Price: $8.10
Inline Filter, thin Inline Filter, thin

Inline Filter thin

Our Price: $11.99
Jet for the Wp10-0527 Crevice Tool Jet for the Wp10-0527 Crevice Tool

Jet for the Wp10-0527 Crevice Tool

Our Price: $19.44
1/8" fpt, male QD, used on Swivel head stair tool 1/8" fpt, male QD, used on Swivel head stair tool

1/8" fpt, male QD, used on Swivel head stair tool

Our Price: $6.46
1/8" fpt, female QD, used on Swivel head stair tool 1/8" fpt, female QD, used on Swivel head stair tool

1/8" fpt, female QD, used on Swivel head stair tool

Our Price: $10.78
Hard to find fittings! - #58) Quick connect 3/8" closed female

58) Quick connect 3/8” closed female.

Our Price: $26.99
Hard to find fittings! - #60) Quick connect 3/8 closed male

60) Quick connect 3/8” closed male.

Our Price: $10.99
Wand Check Valve 1" Wand Check Valve 1"

Wand Leaking or jets too far from the ground? Stop the annoyance right now! Install this 1/8" check valve.

Comes in two sizes:

  • 1" long = part #10-0588
  • 1/2" long = part #10-0587

Our Price: $7.99
1/4" female quick connector, Stainless Steel 1/4" female quick connector, Stainless Steel

Last longer.
More heavy duty.
1/4”,
100% Stainless & 2 o’ring females!
#62

Our Price: $24.99
Sale Price: $19.99
You save $5.00!
1/4" Male quick connector, Stainless Steel 1/4" Male quick connector, Stainless Steel

Last longer.
More heavy duty.
1/4”,
100% Stainless
#64

Our Price: $14.99
Sale Price: $9.99
You save $5.00!
Super Swivel valve

Swivel piece makes your solution line live. No more twisting manually, or need to disconnect.

Our Price: $80.98
1/4" female quick connect with Black Sleeve 1/4" female quick connect with Black Sleeve

The Sleeve is to protect you from heat and from damaging your customers walls and floors!

See the 1/4" Male that goes with this.

Our Price: $11.99
Sale Price: $9.99
You save $2.00!
Wand Check Valve 1/6 Long" Wand Check Valve 1/4" Long

Wand Leaking or jets too far from the ground? Stop the annoyance right now! Install this 1/4" check valve.



  • 1/4" long = part #CHECKV1/4

Our Price: $9.99
   
 
1