A new spin on hard surface cleaning.
Designed with the professional in mind, the Tile & Grout Spinner® uses high pressure to simultaneously power wash and extract water from a variety of hard surfaces such as concrete, grouted tile, ceramic tile, rubber studded floors and more. The Tile & Grout Spinners® set a new standard in hard surface cleaning.
Features:
- 1.5” port (2″ adapter included) that can be attached to a truckmount, high-pressure extractor, or pressure washer
- Positive ventilation glides for instantly dry surfaces!
- Low profile for cleaning under toe kicks and hard-to-reach areas
- Re-buildable flange mounted swivels
- Durable Carbide seals
- Replaceable skirt brush
- Included specially designed wrench for easy removal of spray bar
- Lightweight and scratch resistant nylon handle
- Rated for use with PSI as low as 500 and as high as 3000
Specifications:
- Body Material: Roto-molded Polyethylene
- Cleaning Path: 12″
- T-Handle Style
- Tube Material: Stainless Steel
- Tube Diameter: 1 1/2″
- Pressure Range: 500-3000 PSI
- Swivel Material: Carbide
- Dual Jets
- Jet Size: 1502
- Brush Size: 12″
Included Items:
- 1x P719 1.5″ to 2″ Barbed Adapter
- 1x H723 Spray Bar Removal Wrench
Take your cleaning capabilities to the next level with the Spinner®!
Thomas Nihan –
The Spinner that I ordered has an issue. When the jets rotate one of them rubs against the side edge making an annoying sound and to a slight degree slows the rotation down a bit as well.
Ron P –
When I read other reviews, I was thinking this might not work and I will need to spend a few thousand for a good one. But I ordered it anyway to see for myself, because people were saying stuff like it leaves too much water on the floor, and that not enough water comes out. SO let me tell you what I did to prevent the complaints.
Water:
Your house pressure is around 60 to 100p.s.i. so you need to increase that. I have a water pressure sprayer… for$7 I bought a 22mm x 1/4 inch adapter that would connect to the pressure hose where normally the spraying wand would attach and I added a quick connect.
Issue solved with high pressure water.
Vacuum:
This might be a little more challenging, a shopVac might not have the suction needed experiment with it or as I did, I replaced the shopVac motor with a three stage blower using a 50 foot 2 inch hose this has extra strong suction that worked like a charm.