Wood Floor Cleaning and Finishing Business.

Add or expand your business into wood & wood like floor cleaning. Included Machine, Chemicals & Training:

1- WOOD (Natural, man-made & hybrid – LVP, Vinyl) FLOOR CLASS *

• Learn how to revive wood, luxury vinyl tile (plank) and laminate floors!
• The past few decades have had an increase in wood and laminate flooring both in residential and commercial locations which has increased the demand for affordable re-vitalization of these floors. Refinishing (sanding, etc) is very laborious, messy and expensive.
• Learn how to revive these floors with ease and make 50% more profit than carpet and furniture cleaning.
• Class has theory and demo.
• Very little equipment and supplies are needed for this add-on business.
• You will be able to do these lucrative wood and laminate floor revival jobs immediately after learning. Full support from Magic Wand Company, Magic Taf,  is provided.
• This recorded class  an is CEC IICRC credit class.

2- WOOD (Natural, man-made & hybrid – LVP, Vinyl) FLOOR CLEANING MACHINE

Doodle Bug flat surface scrubber & cleaner – LVT, Wood, Vinyl, Laminate, Natural Stone.

Wets, Scrubs and Extracts in one pass.

Weighs only 22 lb – Doodle Bug is the lightest machine in this category.

Also used for daily mopping of large homes with all flat surfaces – wood, lvt, laminate, marble, granite & viny. Recommended by home cleaners like maid services. Small office like doctor office, store fronts, etc. 

Cordless operations – Lithium battery with 90 min runtime.

1.5 gal fresh and waste water tanks.

Removable waste water tank for quick dumping.

Dimensions 21.25″x 14.5″x17″

Battery 24V/6Ah

1.5 hr run time

3- Professional Floor Finish for WOOD (Natural, man-made & hybrid – LVP, Vinyl) FLOOR*

Professional Floor Finish for WOOD (Natural, man-made & hybrid – LVP, Vinyl) FLOOR. Even natural stone!

• It has a specialized polymer blend for almost all surfaces. Specially natural surfaces that other finishes can not be used on.
• Meets ASTM slip resistance standard and puts back the slip resistance to the floors you protect. At the same time protecting you from liability if you remove and not put back the ASTM resistance back. As is the case for other finishes that are not made for this purpose or meet this standard.
• It’s easily maintained with either high speed burnishing equipment (1,000+ RPM) or conventional spray buffing equipment.
• Easy to apply and maintain.
• First coat can be used as a sealer.
• Leaves a beautiful wet look shine that holds gloss.
• Excellent re-coating ability.
• Never repeals, but instead abrades evenly. Can also be recoated with the old finish, after cleaning.
• Extra concentrated with up to 2,500 sq/ft coverage per gallon.

Unlike other coatings made for use on VCT, Professional Floor Finish seals natural surfaces but still allows the surface to breath. Micron size breather holes (invisible to human eye) let the surface maintain it’s natural moisture level.

How to use on wood. (This process is only for lightly scratched wood.)

• Pretest in an inconspicuous area before beginning
• Clean wood floors with dust mop
• Wet clean wood floors with Trashed Green (not any more concentration than 1:64)
• Dry with microfiber towels – lint free
• Apply using applicator mop
• Spray/dispense away from baseboards to prevent over spray
• Allow 15 min drying between coats. Check.
• In general, after you test to see if the floor takes your finish, you will clean with water or neutral cleaner like Trashed Green Gel. Then apply at least 2 coats of the Professional Floor Finish. If the customer does not want a sheen, use less amount for each coat. If the customer desires a gloss finish, continue applying more coats.

Certain natural wood finishes may react with other finishes and leave streaking. If this is the case, “scratch” with aggressive pad, like Diamond Back, and test again. Never sand wood to the point where you will risk sanding the stain.