1) Close Nipple 1/4″ both ends male.
2) Long Nipple 1/4″ same as above, but longer (11/2″)unthreaded mid-section.
3) Long Nipple 1/4″ same as above, but longer (2″) unthreaded mid-section.
4) Close nipple 3/8″ both ends male.
5) Long nipple 3/8″ same as above, but longer (11/2″) unthreaded mid-section.
6) Close nipple 1/2″ both ends male.
7) Long nipple 1/2″ same as above, but longer (11/2″) unthreaded mid-section.
8) Bushing 1/4″ male x 1/8″ female.
9) Bushing 3/8″ male x 1/4″ female.
10) Bushing 1/2″ male x 3/8″ female.
11) Adapter 1/4″ male x 1/4″ female.
12) Adapter 3/8″ female x 1/4″ male.
13) Adapter 3/8″ male x 3/8” female.
14) Adapter 1/2″ female x 1/4″ male.
15) Adapter 1/2″ female x 3/8″ male.
16) Reducer coupling 1/4″ female x 1/8″ female.
17) Reducer coupling 3/8″ female x 1/4″ female.
18) Coupling 1/8″ female x 1/8″ female.
19) Coupling 1/4″ female x 1/4″ female.
20) Coupling 3/8″ female x 3/8″ female.
21) Flare connector 3/8″ flare male x 1/4″ pipe thread male.
22) Flare connector 3/8″ flare male x 3/8″ pipe thread male.
23) Female 90 degree elbow 1/8″ female x 1/8″ female.
24) Female 90 degree elbow 1/4″ female x 1/4″ female.
25) Female 90 degree elbow 3/8″ female x 3/8″ female.
26) Street elbow 90 degree 1/4″ male x 1/4″ female.
27) Street elbow 90 degree 1/2″ male x 1/2″ female.
28) Street elbow 45 degree 1/4″ male x 1/4″ female.
29) Street elbow 45 degree 3/8″ male x 3/8″ female.
30) Female Tee 3/8″ female x 3/8″ female x 3/8″ female.
31) Street Tee 3/8″ female x 3/8″ female x 3/8″ male.
32) 90 degree elbow barb 3/8″ male thread x 1/2″ (to hose) barb.
33) Hose mender 1/4″ barb to 1/4″ barb.
34) Hose barb 1/4″ barb (hose to pipe) x 1/4″ male thread.
35) Hose barb 1/2″ barb (hose to pipe) x 1/2″ male.
36) Hose barb 5/8″ barb (hose to pipe) x 1/2″ male.
37) Hose barb 3/4″ barb (hose to pipe) x 1/2″ male.
38) Hose barb 3/4″ barb (hose to pipe) x 3/4″ male.
39) Hex nipple reducer 3/8″ male x 1/4″ male.
40) Hex nipple reducer 1/4″ male x 1/8″ male.
41) Hex nipple 1/4″ male x 1/4″ male.
42) Hex nipple 3/8″ male x 3/8″ male.
43) Female swivel connector 3/4″ female x 3/4″ barb.
44) Male connector 3/4″ male x 3/4″ barb.
45) Reducer 3/4″ male x 3/8″ female.
46) Quick connect 1/8″ open female.
47) Quick connect 1/8″ open male.
48) Quick connect 1/4″ female with open male end.
49) Quick connect 1/4″ female with open female end.
50) Quick connect 3/8″ female with open male end.
51) Quick connect 3/8″ female with open female end.
52) High pressure valve 1/4″ female 1/4″ female. 3000 psi.
53) Brass valve 1/2″ female x 1/2″ female.
54) Quick connect 1/2″ female x 1/2″ male open end.
55) Quick connect 1/2″ female x 1/2″ female open end.
56) Quick connect 1/8″ female x 1/8″ open male end.
57) Quick connect 1/8″ female x 1/8″ open female end.
58) Quick connect 3/8″ closed female.
59) Quick connect 1/4″ closed female.
60) Quick connect 3/8″ closed male.
61) Quick connect 1/4″ closed male.
62) Quick connect 1/4″ closed female. Stainless Steel.
63) Quick connect 1/8″ closed female.
64) Quick connect 1/4″ closed male. Stainless Steel.
65) Quick connect 1/8″ closed male.
66) Bushing 3/8″ male x garden hose male.
67) Bushing 3/8″ male x garden hose female swivel. Instantly converts a garden hose to take a 3/8″ thread so you can connect a 3/8″ QD and plug it in directly to your truck-mount.
68) Male SAE 45 degrees Ridged 1/4″ Male x 1/2″ Barb.
69) NPTF/ NPTF 1/8″ Male x 1/8″ Male.
70) 2FTX 1/8″ 37degree Flare/NPTF 1/8″ x 1/8″ Flare 37 degree.
71) Wand filter 1/4″. Goes between the wand valve and QD.
72) T-jet filter 1/4″. This holds a T-jet and has a filter.
73) 1/4″ on one side, the other side has a ferrule that makes it attachable to an 1/8″ tube (usually found on a wand after the valve) with a nut.
74) Adapter 3/8″ male x 3/4″ female.(usually used to reduce 3/4″ male on the water softener to 3/8″ male, so you can attach a 3/8″ QD – #58 or #60 in the picture on left)
All fittings are brass & pipe thread unless indicated otherwise.
Brent King –
The best shutoff valve on the market!
Michael Gerace –
I am very happy with my diesel heat exchanger I purchased from Magic Wand. The heat this heat exchanger puts out is truly amazing and is almost instantaneous! Worth every penny!
Timothy Yeater –
Look no further you found them they were great
Joe Zich –
I only shop at Magic Wand Co.
Jonah Crawford –