Hard to find fitting Carpet Cleaning

You are here: Home > Accessories > Fittings (Hard to Find)

Find by Pricing

Below 5 (1)

5 and Above (6)

Sort By:

Page of 1

Hard to find fittings!

Our Price: $0.60

1) Close Nipple 1/4” both ends male.
2) Long Nipple 1/4” same as above, but longer (11/2”)unthreaded mid-section.
3) Long Nipple 1/4” same as above, but longer (2”) unthreaded mid-section.
4) Close nipple 3/8” both ends male.
5) Long nipple 3/8” same as above, but longer (11/2”) unthreaded mid-section.
6) Close nipple 1/2” both ends male.
7) Long nipple 1/2” same as above, but longer (11/2”) unthreaded mid-section.
8) Bushing 1/4” male x 1/8” female.
9) Bushing 3/8” male x 1/4” female.
10) Bushing 1/2” male x 3/8” female.
11) Adapter 1/4” male x 1/4” female.
12) Adapter 3/8” female x 1/4” male.
13) Adapter 3/8” male x 3/8” female.
14) Adapter 1/2” female x 1/4” male.
15) Adapter 1/2” female x 3/8” male.
16) Reducer coupling 1/4” female x 1/8” female.
17) Reducer coupling 3/8” female x 1/4” female.
18) Coupling 1/8” female x 1/8” female.
19) Coupling 1/4” female x 1/4” female.
20) Coupling 3/8” female x 3/8” female.
21) Flare connector 3/8” flare male x 1/4” pipe thread male.
22) Flare connector 3/8” flare male x 3/8” pipe thread male.
23) Female 90 degree elbow 1/8” female x 1/8” female.
24) Female 90 degree elbow 1/4” female x 1/4” female.
25) Female 90 degree elbow 3/8” female x 3/8” female.
26) Street elbow 90 degree 1/4” male x 1/4” female.
27) Street elbow 90 degree 1/2” male x 1/2” female.
28) Street elbow 45 degree 1/4” male x 1/4” female.
29) Street elbow 45 degree 3/8” male x 3/8” female.
30) Female Tee 3/8” female x 3/8” female x 3/8” female.
31) Street Tee 3/8” female x 3/8” female x 3/8” male.
32) 90 degree elbow barb 3/8” male thread x 1/2” (to hose) barb.
33) Hose mender 1/4” barb to 1/4” barb.
34) Hose barb 1/4” barb (hose to pipe) x 1/4” male thread.
35) Hose barb 1/2” barb (hose to pipe) x 1/2” male.
36) Hose barb 5/8” barb (hose to pipe) x 1/2” male.
37) Hose barb 3/4” barb (hose to pipe) x 1/2” male.
38) Hose barb 3/4” barb (hose to pipe) x 3/4” male.
39) Hex nipple reducer 3/8” male x 1/4” male.
40) Hex nipple reducer 1/4” male x 1/8” male.
41) Hex nipple 1/4” male x 1/4” male.
42) Hex nipple 3/8” male x 3/8” male.
43) Female swivel connector 3/4” female x 3/4” barb.
44) Male connector 3/4” male x 3/4” barb.
45) Reducer 3/4” male x 3/8” female.
46) Quick connect 1/8” open female.
47) Quick connect 1/8” open male.
48) Quick connect 1/4” female with open male end.
49) Quick connect 1/4” female with open female end.
50) Quick connect 3/8” female with open male end.
51) Quick connect 3/8” female with open female end.
52) High pressure valve 1/4” female 1/4” female. 3000 psi.
53) Brass valve 1/2” female x 1/2” female.
54) Quick connect 1/2” female x 1/2” male open end.
55) Quick connect 1/2” female x 1/2” female open end.
56) Quick connect 1/8” female x 1/8” open male end.
57) Quick connect 1/8” female x 1/8” open female end.
58) Quick connect 3/8” closed female.
59) Quick connect 1/4” closed female.
60) Quick connect 3/8” closed male.
61) Quick connect 1/4” closed male.
62) Quick connect 1/4” closed female. Stainless Steel.
63) Quick connect 1/8” closed female.
64) Quick connect 1/4” closed male. Stainless Steel.
65) Quick connect 1/8” closed male.
66) Bushing 3/8" male x garden hose male.
67) Bushing 3/8” male x garden hose female swivel. Instantly converts a garden hose to take a 3/8” thread so you can connect a 3/8” QD and plug it in directly to your truck-mount.
68) Male SAE 45 degrees Ridged 1/4" Male x 1/2" Barb.
69) NPTF/ NPTF 1/8" Male x 1/8" Male.
70) 2FTX 1/8" 37degree Flare/NPTF 1/8" x 1/8" Flare 37 degree.
71) Wand filter 1/4”. Goes between the wand valve and QD.
72) T-jet filter 1/4”. This holds a T-jet and has a filter.
73) 1/4” on one side, the other side has a ferrule that makes it attachable to an 1/8” tube (usually found on a wand after the valve) with a nut.
74) Adapter 3/8” male x 3/4” female.(usually used to reduce 3/4” male on the water softener to 3/8” male, so you can attach a 3/8” QD - #58 or #60 in the picture on left)

All fittings are brass & pipe thread unless indicated otherwise.