You are here: Home > Wands > Wand Parts
Sort By:
1
Jets

Jets.
Basically there are 2 types of jets, T-jets & V-jets,
T-jets (on left in picture) have no thread. They are encased in a holder that is removable, which has threads.
V-jets (on right in picture) have threads on them.

What do the #s on the jets mean?
If it says “1/4” on top, it means it is 1/4” thread.
If it says “VV” on top it is a V jet.
If it says “11002” below, that means the spraying angle is 110 degrees, and the opening of the hole is 02.
The bigger the last #(02 in this case), the bigger the opening.
.02 in the 11102 means 2 gallons per minute water flow at 40 psi.
But at 500 psi 11002 will put out .71 gallons per minute.
Numbers on the jets are always derived using 40 psi pressure.
Typically for carpet cleaning wands, manufactures put in jets that when the last 2 #s(02 in this case) are added together, they equal 06. This usually gives the right amount of heat and flushing ability.
You can decrease heat and increase flushing by getting jets which will add up to larger openings.
To increase heat and reduce flushing, you would do the opposite.
SS below means stainless steel. If it doesn’t say anything, then it is brass. The jets listed here are the most common jets used on wands, and tools like sprayers and hydroforces.
Different jet sizes are also available - call us Toll Free at (877)926-3748 for those.

All brass jets listed above are $6.28 each.
All SS(stainless steel) jets listed above are $12.91 each.

Popular Valves and Repair Kits Popular Valves and Repair Kits

Popular Valves and Repair Kits


1) High pressure valve rated up to 5000 psi, but commonly referred to as 3000 psi. Says on handle: “Linear Made in Italy” Fits some high-pressure wands.

Valves-1 $59.49


2) Gekko high pressure valve says “MV960 Made in Italy” on it. No repair kit

Valves-2 $51.75.


3) 500 psi valve says “P ” on it. Brass, high temp, stainless stem, teflon seat. Valves-3 $33.69

Also available in 200 psi with brass stem. Valves-3 Brass Stem $29.99.

Repair kit for 500 psi complete stem and spring. Valves-3RK is $10.35

Repair kit for 200 psi complete stem assembly & spring. Valves-3RK $10.35


4) Prochem valve.

Valves-4 $109.99

Repair kit. Valves-4RK is $39.99

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75.)


5) 500 psi high temp. with stainless steel stem and handle. Valve says “PMF” on one side & “USA” on other side. Comes with cast aluminum hanger & handle as pictured (to hook up to wand) in either 1 1/2” or 1 1/4 inch. Please specify.

Valves-5P $19.24 (Plastic)

Valves-5A $21.90 (Aluminum)

Valves-5B $29.99 (Brass)

Valves-5S $37.86 (Stainless Steel)

Repair kit: Valves-5RK $10.35


6) Kingston Valve. High pressure valve. (We recommend the Universal Valve #14 that is all stainless steel.)

Valves-6 $26.12

Repair kit: Valves-6RK $23.09


7) 800 psi high temp. with aluminum handle & brass stem, says “PMF” V800”.

Valves-7 $67.85

Repair kit 1 comes with O-rings, seat repair kit & spring R800 $12.65

Repair kit 2 has all of kit 1 & the stem with all parts on it assembled for you R800S $33.85

Repair kit 3 has all the same as kit 2 as well as the bottom nut. R800SN $37.95

Repair kit for newer 800 valves. R800EZ $12.65


8) 800 psi Buttercup valve, manufactured by Para Plate. High temp, stainless stem fits in a hanger. (AC42 bolt on hanger for 1 1/2” tube available). Fits our “Buttercup” wands and others. Softest feel valve

Valves-8 $89.00

Repair kit: Valves-8RK $33.35

AC42 Bolt On Hanger $21.00


9) Westpak Valve(20-0030) 1200 psi valve for Big Boy wands and others.

Valves-9 $35.99

Repair Kit: Valves-9RK $22.99

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75)


10) Kingston low pressure valve says “K”

Valves-10 $19.99

Repair kit: Valves-10RK $14.99


11) Stainless Steel PMF. Stainless steel 1000 psi valve, interchangeable with #3 & #10.

Valves-11 $51.79

Repair Kit for 500 psi complete stem and spring: Valves-11RK $19.99


12) Brass PMF. Exactly like #7, except it is made out of stainless steel so it handles 1250 psi. Says “V1250 PMF” on it.

Valves-12 $87.99

Repair kit 1 comes with O-rings, seat repair kit & spring R800 $12.65

Repair kit 2 has all of kit 1 & the stem with all parts on it assembled for you R800S $33.35

Repair kit 3 has all the same as kit 2 as well as the bottom nut. R800SN $37.95


13) Upholstery Economy PMF. Acetal plastic, 120psi, up to 140 degrees, stainless stem & stainless handle is included. Says “PMF” on one side.

Valves-13 $14.99 (Acetal Plastic)

Valves-13A $22.99 (Aluminum)

Valves-13B $22.99 (Brass)

Repair kit: Valves-13RK $8.05


14) New Universal Valve. All Stainless Steel. 1200 psi. Fits on: Prochem #4, Kingston High Pressure #6,CMP #9 and Kingston Angle #15.

Valves-14 $51.75

Repair kit: Valves-14RK $22.99 (repair kit contains all internal parts, stem, O-rings, spring, ball, teflon seat, and ss washer.)


15) Kingston Angle Valve. Says “K” on it.

Valves-15 $24.39

(We recommend the Universal Valve #14 that is All Stainless Steel and only $51.75)


16) High Pressure Valve 4000psi valve. Says “Type:ST601”. Fits Big Boy II and others.

Valves-16 $42.49


17) 3200 psi. Says “RL 20”. Fits Spraymaster and Hydroforces.

Valves-17 $39.99


18) Westpak (20-0001) valve, found on some upholstery & detailer tools.

Valves-18 $19.99

Repair kit: Valves-18RK $13.80


19) Westpak (20-0022) valve, 1200 psi.

Valves-19 $13.99

Repair kit: Valves-19RK $13.80


20) Precision Fluid Controls (4015), Replaces Para Plate (Buttercup). More heavy duty.

Valves-20 $99.99.

Repair kit: is Valves-20RK $33

Replacement Brush for the Magic Grinder Hand Tool Replacement Brush for the Magic Grinder Hand Tool

Replacement Brush for the Magic Grinder Hand Tool

Our Price: $32.40
Hard to find fittings! Hard to find fittings!

1) Close Nipple 1/4” both ends male.
2) Long Nipple 1/4” same as above, but longer (11/2”)unthreaded mid-section.
3) Long Nipple 1/4” same as above, but longer (2”) unthreaded mid-section.
4) Close nipple 3/8” both ends male.
5) Long nipple 3/8” same as above, but longer (11/2”) unthreaded mid-section.
6) Close nipple 1/2” both ends male.
7) Long nipple 1/2” same as above, but longer (11/2”) unthreaded mid-section.
8) Bushing 1/4” male x 1/8” female.
9) Bushing 3/8” male x 1/4” female.
10) Bushing 1/2” male x 3/8” female.
11) Adapter 1/4” male x 1/4” female.
12) Adapter 3/8” female x 1/4” male.
13) Adapter 3/8” male x 3/8” female.
14) Adapter 1/2” female x 1/4” male.
15) Adapter 1/2” female x 3/8” male.
16) Reducer coupling 1/4” female x 1/8” female.
17) Reducer coupling 3/8” female x 1/4” female.
18) Coupling 1/8” female x 1/8” female.
19) Coupling 1/4” female x 1/4” female.
20) Coupling 3/8” female x 3/8” female.
21) Flare connector 3/8” flare male x 1/4” pipe thread male.
22) Flare connector 3/8” flare male x 3/8” pipe thread male.
23) Female 90 degree elbow 1/8” female x 1/8” female.
24) Female 90 degree elbow 1/4” female x 1/4” female.
25) Female 90 degree elbow 3/8” female x 3/8” female.
26) Street elbow 90 degree 1/4” male x 1/4” female.
27) Street elbow 90 degree 1/2” male x 1/2” female.
28) Street elbow 45 degree 1/4” male x 1/4” female.
29) Street elbow 45 degree 3/8” male x 3/8” female.
30) Female Tee 3/8” female x 3/8” female x 3/8” female.
31) Street Tee 3/8” female x 3/8” female x 3/8” male.
32) 90 degree elbow barb 3/8” male thread x 1/2” (to hose) barb.
33) Hose mender 1/4” barb to 1/4” barb.
34) Hose barb 1/4” barb (hose to pipe) x 1/4” male thread.
35) Hose barb 1/2” barb (hose to pipe) x 1/2” male.
36) Hose barb 5/8” barb (hose to pipe) x 1/2” male.
37) Hose barb 3/4” barb (hose to pipe) x 1/2” male.
38) Hose barb 3/4” barb (hose to pipe) x 3/4” male.
39) Hex nipple reducer 3/8” male x 1/4” male.
40) Hex nipple reducer 1/4” male x 1/8” male.
41) Hex nipple 1/4” male x 1/4” male.
42) Hex nipple 3/8” male x 3/8” male.
43) Female swivel connector 3/4” female x 3/4” barb.
44) Male connector 3/4” male x 3/4” barb.
45) Reducer 3/4” male x 3/8” female.
46) Quick connect 1/8” open female.
47) Quick connect 1/8” open male.
48) Quick connect 1/4” female with open male end.
49) Quick connect 1/4” female with open female end.
50) Quick connect 3/8” female with open male end.
51) Quick connect 3/8” female with open female end.
52) High pressure valve 1/4” female 1/4” female. 3000 psi.
53) Brass valve 1/2” female x 1/2” female.
54) Quick connect 1/2” female x 1/2” male open end.
55) Quick connect 1/2” female x 1/2” female open end.
56) Quick connect 1/8” female x 1/8” open male end.
57) Quick connect 1/8” female x 1/8” open female end.
58) Quick connect 3/8” closed female.
59) Quick connect 1/4” closed female.
60) Quick connect 3/8” closed male.
61) Quick connect 1/4” closed male.
62) Quick connect 1/4” closed female. Stainless Steel.
63) Quick connect 1/8” closed female.
64) Quick connect 1/4” closed male. Stainless Steel.
65) Quick connect 1/8” closed male.
66) Bushing 3/8" male x garden hose male.
67) Bushing 3/8” male x garden hose female swivel. Instantly converts a garden hose to take a 3/8” thread so you can connect a 3/8” QD and plug it in directly to your truck-mount.
68) Male SAE 45 degrees Ridged 1/4" Male x 1/2" Barb.
69) NPTF/ NPTF 1/8" Male x 1/8" Male.
70) 2FTX 1/8" 37degree Flare/NPTF 1/8" x 1/8" Flare 37 degree.
71) Wand filter 1/4”. Goes between the wand valve and QD.
72) T-jet filter 1/4”. This holds a T-jet and has a filter.
73) 1/4” on one side, the other side has a ferrule that makes it attachable to an 1/8” tube (usually found on a wand after the valve) with a nut.
74) Adapter 3/8” male x 3/4” female.(usually used to reduce 3/4” male on the water softener to 3/8” male, so you can attach a 3/8” QD - #58 or #60 in the picture on left)
All fittings are brass & pipe thread unless indicated otherwise.

Our Price: $0.60
Rx-20 nut for Skid Plate Rx-20 nut for Skid Plate

Rx-20 nut for Skid Plate

Our Price: $2.00
Rx Gasket for Skid plate Rx Gasket for Skid plate

Rx Gasket for Skid plate

Our Price: $3.00
1/4" qd brass 1/4" male quick connector, mate to 1/4"QDFemale

1/4" most commonly used connectors for truck-mounts.

These QDs have stainless steel tips that withstand hotter water! See the 1/4" Female that goes with this.

Our Price: $7.99
Sale Price: $3.95
You save $4.04!
Rx-20 Foam Handle Grip Rx-20 Foam Handle Grip

Rx-20 Foam Handle Grip

Our Price: $5.49
Rx-20 Felt Hub Gasket Rx-20 Felt Hub Gasket

How many do you need?

Our Price: $6.37
1/8" fpt, male QD, used on Swivel head stair tool 1/8" fpt, male QD, used on Swivel head stair tool

1/8" fpt, male QD, used on Swivel head stair tool

Our Price: $6.46
RX 4" Stainless Steel tube, threaded RX 4" Stainless Steel tube, threaded

RX 4" Stainless Steel tube, threaded

Our Price: $6.59
Rotovac Felt for 360i Rotovac Felt for 360i

Felt for Rotovac for 360i

Our Price: $6.99
1/4" female quick connector, Brass, mate to 1/4"QDmale 1/4" female quick connector, Brass, mate to 1/4"QDmale

1/4" most commonly used connectors for truckmounts, brass
See the 1/4" Male that goes with this.

Our Price: $9.99
Sale Price: $7.95
You save $2.04!
Rx-20 Vacuum hub hose Rx-20 Vacuum hub hose

Do you need 1? or do you need 5? Please make sure you indicate how many you need.

Our Price: $7.98
Rx-20 4"NippleSS Rx-20 4"NippleSS

4"NippleSS, #052-515

Our Price: $7.98
Wand Check Valve 1" Wand Check Valve 1"

Wand Leaking or jets too far from the ground? Stop the annoyance right now! Install this 1/8" check valve.

Comes in two sizes:

  • 1" long = part #10-0588
  • 1/2" long = part #10-0587

Our Price: $7.99
T-Jet Filter T-Jet Filter

T-jet fits in this and the filter picks up debris that would regularly clog the jet.

Our Price: $8.61
Inline filter, 1/4" Inline filter, 1/4"

Wand Filter
Keeps debris from getting caught in the jets.
Easy do-it-yourself installation.
Save headaches from on the job clogged jets.

Our Price: $8.61
Rotovac 360 - Hand Grip Rotovac 360 - Hand Grip

Rotovac 360 - Hand Grip

Our Price: $9.99
1/4" Male quick connector, Stainless Steel 1/4" Male quick connector, Stainless Steel

Last longer.
More heavy duty.
1/4”,
100% Stainless
#64

Our Price: $14.99
Sale Price: $9.99
You save $5.00!
1/4" female quick connect with Black Sleeve 1/4" female quick connect with Black Sleeve

The Sleeve is to protect you from heat and from damaging your customers walls and floors!

See the 1/4" Male that goes with this.

Our Price: $11.99
Sale Price: $9.99
You save $2.00!
Wand Check Valve 1/6 Long" Wand Check Valve 1/4" Long

Wand Leaking or jets too far from the ground? Stop the annoyance right now! Install this 1/4" check valve.



  • 1/4" long = part #CHECKV1/4

Our Price: $9.99
Hoss Handle Pin Hoss Handle Pin

Our Price: $10.29
1/8" fpt, female QD, used on Swivel head stair tool 1/8" fpt, female QD, used on Swivel head stair tool

1/8" fpt, female QD, used on Swivel head stair tool

Our Price: $10.78
Inline Filter, thin Inline Filter, thin

Inline Filter thin

Our Price: $11.99
Rotovac 360i Valve Repair Kit Rotovac 360i Valve Repair Kit

Rotovac 360i Valve Repair Kit

Our Price: $11.99
2" X 6" black vinyl SLEEVE GRIP 2" X 6" black vinyl SLEEVE GRIP

2" X 6" black vinyl SLEEVE GRIP

Our Price: $12.94
1/4" Ball Shutoff Valve 1/4" Ball Shutoff Valve

Heavy Duty. New design eliminates the need for an additional adapter nipple.

Our Price: $15.99
Rotovac CFX panel switch Cool Wrap for your Wand

A heat barrier handle for the lower portion of the wand that operator can grab when cleaning stairs or a riser with the wand or stair tool.

Wand wrap protects your hand
from heat when doing stairs,
or just holding the wand.

Our Price: $16.18
Whip Hose Whip Hose

The Whip Hose fits almost all upholstery tools. 1/8" and 1/4" ends.

Our Price: $19.99
Sale Price: $16.50
You save $3.49!
Rotovac 360 Jets 1.5 (standard) Rotovac 360 Jets 1.5 (standard)

Choose Brass or Stainless.
(Taf suggests upgrading to Stainless Steel and save more in quality and money then you can imagine.)

Picture is of the Stainless steel jet

Our Price: $16.99
Solution hose for Swivel head Stair Tool Solution hose for Swivel head Stair Tool

Solution hose for Swivel head Stair Tool

Our Price: $17.43
Rotovac 360i Black Gasket Rotovac 360i Black Gasket

Rotovac 360i Black Gasket

Our Price: $18.00
1/4" female quick connector, Stainless Steel 1/4" female quick connector, Stainless Steel

Last longer.
More heavy duty.
1/4”,
100% Stainless & 2 o’ring females!
#62

Our Price: $24.99
Sale Price: $19.99
You save $5.00!
v Multi-Sprayer Upholstery Tool

Multisprayer Upholstery tool attachment for any of the multisprayer models. Comes with quick connect for easy change between carpet wand and upholstery tool.

Our Price: $19.99
DriMaster Window DriMaster Window

DriMaster view Window.
#041-406

Our Price: $20.17
VALVE HANGER for V2P VALVE HANGER for V2P

VALVE HANGER for V2P

Our Price: $20.52
Rotovac 360i Clear View Tube assembly with cuffs Rotovac 360i Clear View Tube assembly with cuffs

Rotovac 360i Clear View Tube with vac hose and connectors

Our Price: $21.00
Rotovac CFX float Rotovac CFX float

Our Price: $21.00
Rotovac Momentary Switch Rotovac Momentary Switch

This is the momentary switch to operate the motor assy. This is the switch ONLY and not the entire assembly, which is sold separately.

Our Price: $23.00
Hose for the Prochem Quad Wand with fittings Hose for the Prochem Quad Wand with fittings

Solution hose for the Prochem Quad jet Wand with fittings.

Our Price: $23.74
Locking Female Quick Disconnects Locking Female Quick Disconnects

Locking Female Quick Disconnects.
Locks the male and female securely.
Works with any 1/4" male QD
Brass

Our Price: $26.99
VACUUM RELEASE, 1 1/2" hose to hose VACUUM RELEASE, 1 1/2" hose to hose

VACUUM RELEASE, 1 1/2" hose to hose

Our Price: $27.00
Handle 2 Inch for Wand Handle 2 Inch for Wand

  • Wand Handle 2" for Wand

Our Price: $27.00
1/4" shutoff valve High Pressure 1/4" shutoff valve High Pressure

1/4” shut-off valve for use with high pressure machines like the Turbo. Handles up to 3000 psi. Lasts longer. Made from heavy duty Cobalt! 1/4”shutoffhp

Our Price: $35.49
Sale Price: $29.99
You save $5.50!
Rotovac 360i On/Off Switch Rotovac 360i On/Off Switch

Rotovac 360i On/Off Switch

Our Price: $29.99
VACUUM RELEASE, 1 1/2" tool to 1 1/2" hose VACUUM RELEASE, 1 1/2" tool to 1 1/2" hose

VACUUM RELEASE, 1 1/2" tool to 1 1/2" hose

Our Price: $31.32
Rx-20 wheel Rx-20 wheel

Rx-20 Wheel

Our Price: $36.70
Prochem Upholstery Tool Repair Kit Prochem Upholstery Tool Repair Kit

Prochem Upholstery Tool Repair Kit

Our Price: $38.89
Cobra Boot Cobra Boot

Cobra Boot, teflon Ring

Our Price: $39.62
Rx-20 Base out Hose - 3 feet Rx-20 Base out Hose - 3 feet

Rx-20 Base out Hose - 3 feet

Our Price: $45.30
CFM Boosting Glide CFM Boosting Glide

CFM Boosting Glides!
For the Buttercup and Easy Glide wands.
Reduce drying time and fatique.

Our Price: $49.99
General 5000 psi replacement valve for Sniper 06 Valve 21

General 5000 psi replacement valve for Sniper 06

Our Price: $53.98
Turbo boot for Turbo Hybrid TH-262 Turbo boot for Turbo Hybrid TH-262

Turbo boot for Turbo Hybrid,

Our Price: $59.99
Rotovac Brush Block Blue Medium Rotovac Brush Block Blue Medium

Blue (medium) replacement brush block.  Block and brush only.  No vacuum ports or jets

Our Price: $69.00
Rotovac Brush Block Grey soft Rotovac Brush Block Grey soft

Grey (soft) replacement brush block.  Block and brush only.  No vacuum ports or jets

Our Price: $69.00
Rotovac Brush Block Black Stiff Rotovac Brush Block Black Stiff

Black (stiff) replacement brush block.  Block and brush only, no vacuum ports or jets.

Our Price: $69.00
Rx-20 Cone Jet Rx-20 Cone Jet

Jet in the new Rx-20 3 jet head assembly

Our Price: $69.20
Decal Set for RX-20 Rotary Drimaster Tool Decal Set for RX-20 Rotary Drimaster Tool

Three piece decal set for te RX-20 Rotary extractor.

Our Price: $70.74
Rx Skid Plate Rx Skid Plate

Rx-20 Skid Plate

Our Price: $76.00
New DriMaster™ Tool Handle New DriMaster Tool Handle

This is the handle for the New DriMaster™ Tool
HydraMaster’s patented DriMaster™ Upholstery Tool is unlike any tool you have ever used. Using new Jetless Cleaning Technology, it has no trigger valve, no spray jet, and never needs a second drying-pass. The solution is under constant flow, trained by the patented injector bar and slotted vacuum port system. The result is a highly effective cleaning tool that works without overwetting or heat loss. Even narrow areas can be cleaned without any overspray.
Handle sold seperately.

Our Price: $77.99
sapphire scientific upholstery pro solution line sapphire scientific upholstery pro solution line

Replacement solution hose for the Sapphire Scientific Upholstery tool.

Our Price: $79.82
Rotovac Drive Gear Rotovac Drive Gear

Rotovac Motor Gear Repair Kit

Our Price: $89.16
Zipper Transport Tray Zipper Transport Tray

Zipper Transport Tray

Our Price: $95.00
Rotovac Bonnet Block Head Rotovac Bonnet Block Head

Rotovac Bonnet Block Head For attaching cloth bonnet for encapsulation.

Our Price: $95.49
Dri Master shut off Valve Dri Master shut off Valve

Dri Master shut off Valve

Our Price: $97.18
Dri Master Bar Jet Dri Master Bar Jet

Now All Stainless Steel!
#076-070

Our Price: $112.69
Rx-20 Valve Stainless Steel Rx-20 Valve Stainless Steel

Rx-20 Valve Stainless Steel

Our Price: $123.00
Rotovac 360 XL Drive Block Rotovac 360 XL Drive Block

Rotovac 360 XL Drive Block

Our Price: $125.00
RX-20 Rotary Union RX-20 Rotary Union

This is the swivel on the top of the Rx20

Our Price: $134.00
Rx-Double Threaded Hub Rx-Double Threaded Hub

Rx-20, Double threaded Hub, 107-0201

Our Price: $156.54
Rotovac stair head attachment Rotovac stair head attachment

7 in stair head for Rotovac 360i

Our Price: $159.99
Rotovac CFX 3 stage motor Rotovac CFX 3 stage motor

Rotovac CFX 3 stage motor

Our Price: $169.00
RX20/CX20 Star RX20/CX20 Star

This is just the star with nothing else. Fits Rx20 band Cx20 rotary extractors.

Our Price: $178.00
SX-7 Hide A Hose Assembly for hand tools SX-7 Hide A Hose Assembly for hand tools

SX-7 Hide A Hose Assembly for hand tools

Our Price: $195.00
Raptor 14" Brush head attachment Raptor 14" Brush head attachment

Raptor 14" Brush head Attachment

Our Price: $199.00
Raptor 14" Squeegee head attachment Raptor 14" Squeegee head attachment

Raptor 14" Squeegee head Attachment

Our Price: $205.00
Rx-20 Bonnet Attachment Rx-20 Bonnet Attachment

Rx-20 Bonnet Attachment

Our Price: $211.68
rx 20 glides rx 20 glides

rx 20 glides

Our Price: $219.00
Item in picture may not be exact item Ceiling Wand

Our Price: $243.30
RX-20 High speed Motor Pad Drivers for the Cimex 19" (3 PK)

Pad Driver for the Cimex 19". Also know as Instalock. If you would like a different driver, please select the driver you want from this pdf.

There are so many drivers that it really depends what you need it for. Once you select it, call with the part # for price.

Our Price: $255.96
Tile Head without Vacuum Ring for Rotovac 360I Tile Head without Vacuum Ring for Rotovac 360I

Tile Head without Vacuum Ring for Rotovac 360I

Our Price: $318.60
RX-20 High speed Motor RX-20 High speed Motor

New RX-20 High Speed AC motor NO Gear box.

Our Price: $376.51
Carpet Brush Head for Rotovac 360i Carpet Brush Head for Rotovac 360i

Carpet Brush Head for Rotovac 360i. This and all other attachments available. Call with any questions.

Our Price: $395.00
New Tile Head for Rotovac 360I - No Vac Ring Needed Anymore! New Tile Head for Rotovac 360I - No Vac Ring Needed Anymore!

New Tile Head for Rotovac 360I - No Vac Ring Needed Anymore!
This is the Tile Head you want to get!
No longer necessary to get the Tile head with the Vac Ring... this one is one piece for the same price.

Our Price: $495.00
Quad head for Rotovac 360XL Quad head for Rotovac 360XL

Quad Head for Rotovac XL

Our Price: $545.00
Rotovac 15" Quad head with Teflon Glides.  Includes shroud Rotovac 15" Quad head with Teflon Glides. Includes shroud

The 15" quad head with shroud kit allows you to adapt a larger head to the 360i. The head has 4 Teflon vacuum ports and also 4 spray jets. Adding 3 extra inches to your cleaning path will help you fly through commercial or residential jobs up to 25% faster!!! The standard head has a 12" cleaning path. That head and shroud can easily be replaced with this 15" head and shroud.

Note to consider: If you upgrade to the 15" head there will be an extra vacuum port and extra jet compared to the standard head. With this in mind, there will be need for more vacuum and water pressure. Please make sure you have high vacuum so you can suck up the water you put down and have a big enough pump to get the psi you want. The 15" quad head works best with a truckmount.

Our Price: $595.00
Rotovac360I Motor and Gear Box Assy Rotovac360I Motor and Gear Box Assy

Rotovac 360I Motor and Gear Box Assy complete with Harness

Our Price: $595.00
New Tile Head for Rotovac 360I - No Vac Ring Needed Anymore! New Tile Head for Rotovac 360I XL - No Vac Ring Needed Anymore!

New Tile Head for Rotovac 360I XL - No Vac Ring Needed Anymore!
This is the Tile Head you want to get!
No longer necessary to get the Tile head with the Vac Ring... this one is one piece for the same price.

Our Price: $595.00
Carpet Brush Head for Rotovac 360I XL - with Teflon Carpet Brush Head for Rotovac 360I XL - with Teflon

Carpet Brush Head for Rotovac 360I XL - with Teflon

Our Price: $595.00
T-Rex Tile and Grout Brush Head T-Rex Tile and Grout Brush Head

T-Rex Tile and Grout Head. Trex new tile and grout head.

Features:

  • Vacuum nozzles for quick drying times.
  • Tough bristles specially designed to take on the toughest tile & grout jobs.
  • 15″ cleaning surface.
  • Compatible with the Mytee T-REX™

Our Price: $599.00
Rx-20 medium Hard Surface Attachment Rx-20 medium Hard Surface Attachment

Rx-20 medium Hard Surface Attachment

Our Price: $759.00
Rx-20 Vac Head Assembly New Style Rx-20 Vac Head Assembly New Style

Rx-20 Vac Head Assembly New Style

Our Price: $863.94
T-Rex Flexstar head T-Rex Flexstar head

The most versatile carpet cleaning head is now available.  This head hugs to the carpet and conforms to any irregular surface.  Smooth operation on commercial glue downs and reduced chattering on low-profile carpets with six vacuum heads in contact with the carpet at all times for maximum vacuum.

Our Price: $899.00
RX-20 High Sped Gear Box RX-20 High Sped Gear Box

New RX-20 High Speed Gear Box Assy No Motor.

Our Price: $976.63
CMX20 Vac Head New CMX20 Vac Head New

CMX20 Vach Head New 604-053-002

Our Price: $1,121.95
   
 
1


Other Categories